 Absorbs petroleum based spills, leaks or drips from land or water. Wring and reuse up to 100 times. Custom sizes available.
#1812 1"x8"x12" / 25 mm x 200 mm x 300 mm 24/CASE |
 Polyethylene fill absorbs fuels and oils. Wring and reuse.
#1050 10"x12" / 250 mm x 300 mm 24/CASE |
 Pre-cut for your drum. Absorb drips and spills then wring and reuse. #1825 1/2"x22"x22" / 13 mm x 550 mm x 550 mm 12/CASE |
 Stops leaks at their source. Petro-Plug will temporarily seal a 3" hole on almost any surface. No mixing or preparation necessary. Just apply. #1860 1 lb. / .5 kilo. 8/CASE
|
 Blocks drains to control spills so they can be absorbed. Saves clean-up costs. #5001 20"x30" / 500 mm x 750 mm 12/CASE |
 Use in place of socks around the base of machinery or by floating on retention ponds. Squeeze and use again. Connect several to make a chain.
#1920 1"x4"x48" / 25 mm x 100 mm x 1200 mm 12/CASE |
 18 gauge steel wringer mounts on your drum or waste oil tank. Wrings petroleum liquids from Petro-KwikSorb pads and deposits safely in containment. #0670 22" unit / 550 mm 1/CASE |
 Heavy duty biodegradable cleaner/degreaser. Cleans PetroSorb products. Also use for general shop maintenance and shop floor cleaning.
#1870 16 oz./0.5 ltr. Bottles 12/CASE
|
Petro-SockNo picture available.Socks absorb fuels and oils. Reusable.
#1832 41/2"x48" / 113 mm x 1200 mm 8/CASE |
Petro-BrickNo picture available.Petro-KwikSorb in a compact brick size for small drips and leaks. #0660 3"x4"8" / 75 mm x 100 mm x 200 mm 8/CASE |
 See below for kit contents |
Petro-Separator A & BNo picture available.Biodegradable chemicals will aid operation of oil water separators. Petro-Separator A in first compartment separates oil from water. Petro-Separator B sinks any residual oil in the final compartment.
#0640 Petro-Separator A (1 gal./3.75 ltr.) 6 per/case
|
